This colour is a sample of a 1958 Tele Neck in Good Condition with Clear Nitro

• All our sample neck colour photos show three coats of the labelled nitro tint laquer on top of a clear sanding sealer base.

• In a 400g aerosol spray can

• Nitrocellulose laquers are now crafted in our Catalina specialised Paint Mixing Workshop.

• We have spent over $40,000+ AUD and hundreds of hours to bring you perfection in paint.
• Download Safety Data Sheet
• Cannot be shipped outside Australia or by Express Post
•  
• WARNING FLAMMABLE AEROSOL Causes serious eye irritation.
  May cause drowsiness or dizziness. Deliberately sniffing or inhaling 
  spray can be harmful or fatal.

• DIRECTIONS FOR USE: 
  Always use a Respirator/Mask at a 
  rating  of AS/NZS 1716,P95. or higher.Use in a well ventilated area.
  Use protective gear. Face/Eyes/Gloves/Mask
  Do NOT breath in fumes,gas,mist,vapours or spray.
  Keep away from heat/sparks/open flames.

Warm can in direct sunlight for 20mins or till can is above 22 deg.  DO NOT exceed 35 deg.
Shake vigorously for two minutes before, and at intervals during painting to obtain correct colour 
and gloss. The mixing ball will rattle around inside.

SURFACE PREPARATION.

Remove all traces of oil, wax and grease with wax and grease remover. 
Use sanding sealer on bare wood first. Depending on colour, a white or grey primer may be needed. 
For maximum adhesion sand with Wet & Dry between coats. 1200 grade is sugested . 
ONLY EVER SAND DRY. Do not introduce water to Nitrocellulose. 
ONLY spray 1 to 2 coats per 24 hours. 
NEVER sand metallic Nitro/Lucite and always spray a minimum of 3 clear coats over the top.
After last coat of clear , leave for two weeks before final sand and buff. 

• PROOELLANT is Hydrocabon. Also contains Acetone 440g/L